Combination Stirring Hotplates
Hach Company SC4500 Ctrl Prog LAN EthIP 1 d
SC4500 Controller-Prognosys-LAN Ethernet IP-1 digital Sensor-1 mA Input-100-240 VAC-without power cordIncludes Controller-Non-Claros Embedded Prognosys-without power cord includes mounting hardware
Electron Microscopy Sciences SUPER-NUOVA™ Digital Stirring Hot Plate Aluminum Top, 120 V, 7.25" x 7.25" heating surface, 50 to 1200 RPM
These hot plates are ideal for cold rooms & can be used at 0-27°C w/ 80% relative humidity, in a non-condensing environment. Stir Trac technology offers improved slow speed stirring, consistent speed control & stronger magnetic coupling from 50 rpm to 1200 rpm. The integral ring stand holder accepts 1.3cm diameter support rod. A single knob design controls heating/stirring & goes up slowly when rotated slowly & faster when rotated faster. Adjustable 1 °C & 1 rpm increments. The RS232 port enables output of time count, temp set points, top surface/remote probe temp, stirring set point & actual speed to a printer or computer. Supplied w/ 6" type K probe, detachable cord, retention bracket that prevents cord from accidental removal, & a TFE-coated stir bar. Walk-away timer shuts off heating, stirring or both after a preset user-defined interval. Durablle aluminum top for uniform heat distribution.Heating surface: 7.25" x 7.25"RPM: 50 to 1200Amps: 5.6Wattage: 670
Biosurface Technologies Corp Anaerobic CDC Biofilm Reactor with 220V Stir/Hot Plate, Mid- to High-Shear Laboratory Biofilm Growth Device, BioSurface Technologies Corporation.
"The CDC Biofilm Reactor® consists of eight (8) polypropylene coupon holder rods suspended from a UHMW-polyethylene ported lid. Each coupon holder rod can accommodate three (3) 1/2-inch (12.7 mm) diameter coupons, for a total of twenty-four(24) coupons. The lid (with coupon holders and coupons) is mounted in a 1-liter glass vessel with side-arm discharge port. A liquid growth media or biocide is circulated through the vessel while mixing and shear is generated by a magnetic stir bar and vane rotated by a magnetic stir plate.Sampling of the coupons is conducted by aseptically removing individual coupon holder rods with accompanying coupons (3). The coupon holder (or blank) rod is replaced in the lid after sampling to allow the time-course experiment to continue. The coupon removed from the reactor vessel is then used for treatment evaluations, scraped or vortexed to collect the biofilm sample for further study.
Enterprise Technology Solutions Brother Label Maker, PC/Mac, 3-1/5"x6"x5-3/5", Black/White
PC-connectable label maker offers simple connectivity for your PC and Mac with no software or drivers to install. Design custom labels using fonts and graphics from your PC or Mac and the included label design software. Download templates from the Cloud to add to your label library (Internet connection required). With super-fast printing and auto cutter, generate extra-wide, laminated TZe tapes - 9/64", 1/4", 3/8", 1/2", 3/4", 1" (3.5mm, 6mm, 9mm, 12mm, 18mm, 24mm) widths for indoor/outdoor use. Formatting options include logos, bar codes, frames and symbols on any label. The PT-P700 includes an AC adapter, USB cable, software and starter tape.
Hach Company SC4500 Ctrl Prog LAN Profi 1 d
SC4500 Controller-Prognosys-LAN Profinet-1 digital Sensor-1 mA Input-100-240 VAC-without power cordIncludes Controller-Non-Claros Embedded Prognosys-without power cord includes mounting hardware
Electron Microscopy Sciences SUPER-NUOVA™ Digital Stirrers Ceramic Top, 220-240 V, 50 to 1200 RPM, 7.25" x 7.25 heating surface
SuperNuova digital stirers with Stir Trac offers improved slow speed stirring, consisting speed control and stronger magnetic coupling from 50 rpm up to 1200 rpm. The seamlesss reflective white ceramic top enhances sample visibility and the rugged low-profile cast aluminum body provides stability and durability. The easy-to-read digital displays indicate rpm for stirring models, adjustable in 1 rpm increments. The user programmable preset buttons allow for up to four often-used stirring speeds to be recalled at the touch of a single button. Set points go up slowly when the knob is rotated slowly, faster as the knob is rotated faster. The knob then is locked out to avoid accidental changes. All models supplied with 2" x 3/8" dia TFE-coated stir bar, detachable cord and retention racket that prevents cord from accidentally removed.
RPM: 50 to 1200
Heating surface: 7.25" x 7.25
Footprint: 8.2" x 13"
Height: 3.8"
Hach Company SC4500 Ctrl Prog Prof DP 1 dig
SC4500 Controller-Prognosys-Profibus DP-1 digital Sensor-24 VDC-without plugIncludes Controller-Non-Claros Embedded Prognosys-without power cord includes mounting hardware
Electron Microscopy Sciences EMS Digital Hotplate, 230 V
EMS hotplates, stirrers and hotplate-stirrers feature an exceptionally durable, chemical resistant, white ceramic work surface. Their space-efficient design (7 x 10.5" footprint), makes them ideal for use on crowded benchtops and inside bio-hoods.
Advanced microprocessor controls allow quick, precise adjustment of speed and temperature. The large, backlit LCD display provides constant visualization of the speed and temperature while a safety LED indicates when the top plate is above 50 degree C. In addition, an optional probe is available for applications that require precise temperature contol. When connected, the probe provides direct feedback to the microprocessor, which continuously adjusts and maintains the selected temperature in the sample within ± 0.5 degree C.
Hach Company SC4500 Ctrl Prog Profi 2 dig S
SC4500 Controller-Prognosys-Profinet-2 digital Sensors-24 VDC-without plugIncludes Controller-Non-Claros Embedded Prognosys-without power cord includes mounting hardware
Sigma Aldrich Fine Chemicals Biosciences IKAR C MAG HS hotplate sti1EA
C-MAG HS 7 IKAMAGNew magnetic stirrer with heating and ceramic heating plate which offers excellent chemical resistance.Powerful motor for stirring quantities of up to 10 L (H2O)Fixed safety circuit of 550CHot Top indicator hot surface warning to prevent burnsExact temperature setting via digital display (LED)Bushing according to DIN 12878 for connecting a contact thermometer e.g. ETS-D5 enables precise temperature controlDigital error code displayElevated control panel for protection against leaking liquids
Electron Microscopy Sciences SUPER-NUOVA™ Digital Stirring Hot Plate Ceramic Top, 120 V, 10.5" x 10.5" heating surface, 50 to 1200 RPM
These hot plates are ideal for cold rooms and can be used at 0-27°C with 80% relative humidity, in a non-condensing environment. Stir Trac technology offers improved slow speed stirring, consistent speed control and stronger magnetic coupling from 50 rpm to 1200 rpm. The integral ring stand holder accepts 1.3cm diameter support rod. A single knob design controls heating/stirring and goes up slowly when rotated slowly and faster when rotated faster. Adjustable 1 °C and 1 rpm increments. The RS232 port enables output of time count, temp set points, top surface/remote probe temp, stirring set point and actual speed to a printer or computer. Supplied with 6" type K probe, detachable cord, retention bracket that prevents cord from accidental removal, and a TFE-coated stir bar. Walk-away timer shuts off heating, stirring or both after a preset user-defined interval. Alkali/acid resistant white ceramic top.Heating surface: 10.5" x 10.5"RPM: 50 to 1200Amps: 10.1Wattage: 1210
Alkali Scientific™ 3 Position Digital Hotplate-Stirrer With Ceramic Surface And 120C Top Temperature, 115V
The Alkali Multi-Position Stirring Hotplates provide simultaneous heating and stirring of multiple samples. The large top-plates feature a durable, chemically resistant, white, ceramic coating that provides exceptionally uniform temperature control up to 120°C. Both mixing speed and temperature are conveniently controlled on the digital display, which also features a safety LED that warns the user when the top plate is hot and unsafe to touch. Three models are available, offering either 3, 5 or 10 position capacity. Each stirring position is driven by an independent motor, providing efficient mixing of sample sizes up to 1000ml. With increased spacing (100mm) between stirring positions, the top surface is designed to accept a wide range of vessel types, including beakers, Erlenmeyer flasks and media storage bottles.
Electron Microscopy Sciences SUPER-NUOVA™ Hot Plate Ceramic Top, 240 V
Digital hote plate features a rugged low profile cast aluminum body provides stability and durability and a warning system that deters accidental contact with hot surface. The Remote probe allow for accurate reading of solution temperature to 0.1°C for temperature below 100°C. A user-adjustable over-temperature protection prevents runaway temperature conditions. Seamless reflective easy-to-clean, alkali/acid resistant white ceramic top.
Surface: 7.25"x7.25"